Material: Plexiglass (transparent acrylic), 0.1″ typical wall-thickness
Cooling Fans
Dual Axial Fans: 12 volt DC brushless-motors, 25-CFM (50-CFM total) with finger guards
Protection: Locked rotor (stall) protected with auto-restart after the locked rotor condition is removed
Noise Level: 30 dBA/fan
Current Consumption: See the I & O Manual Section II, 2.3.1 Power Consumption Determination, sub-paragraph FX-2120 Protective Cover Fan Current Consumption for details
Environmental Ingress Protection: IP68 (dust tight and waterproof)
Life Expectancy: 60,000 hours @ 45° C, 65% humidity
Cooling Fan Power Supply
DC Power Supply: Wide input-range, regulated output DC-to-DC converter (10 to 33 VDC in/12 VDC out), galvanically isolated, overload and short-circuit protected
DC Power/Control Cable: Ruggedized over-molded cable assembly, black
Cooling Fan Operation: Automatic when any heatsink equipped or relay equipped FX-2000 series I/O module output is enabled, 10-second on-to-off hysteresis, fan inhibit below +4˚ C and fan force-on above +48° C (inhibit and force-on operation are independent of module output enable status).
FX-2110 Mounting Plate Installation Hardware Kit: Eight stainless-steel 6-32 x 3/8″ Phillips screws and nylon self-retaining flat washers supplied
