I/O Modules
Off-the-shelf, galvanically isolated, high-performance modular plug-in I/O solutions for use with the FX-2100 UMC. These compact (2.5″ x 2.5″), easy-to-use modules are engineered to meet challenging control, monitor, and sense tasks operating in harsh environments while providing fault-protection features such as, short circuit, over temperature, and load dump. The fault-protection capabilities extend to the installation environment as well, with survivability against inadvertent reverse polarity and over-voltage exposure.
I/O Module Capabilities
- Power FET DC Sink and Source Switches
- Latching Power Relay Contacts with Zero Relay-Hold Power
- Non-Latching IEC61010 Compliant Power Relay Contacts
- DC Motor H-Bridge Drivers
- Stepper Bipolar-Motor Drivers
- Bidirectional TTL-level Digital Isolators
- IEC61131-2 Compliant Switch State Sensors
- 4-20 mA Current Loop Receivers
- Direct Current Bidirectional and Unidirectional Sensors
- Precision DC Voltage Sensors
For complete module specifications, click on the blue info button in the table below.
I/O Module Examples
Off-the-Shelf I/O Modules
click on the module image for more information
Model | Description | Capability | More |
|---|---|---|---|
FX-2210 | Low-Side Switch Module | Four switch-to-ground (sink) 8 A power FET switches | Info |
FX-2220 | High-Side 1 A Switch Module | Eight switch-to-load (source) 1 A power FET switches; parallel operation capable | Info |
FX-2230 | High-Side Switch Module | Four switch-to-load (source) 8 A power FET switches | Info |
FX-2240 | Power Relay Module | Four 8 A SPST latching relay contacts with zero relay-hold power and built-in hardware set/reset pulse generators | Info |
FX-2245 | Power Relay IEC 61010 Module | Four 5 A SPST non-latching relay contacts with IEC61010-2-201 compliant reinforced-insulation | Info |
FX-2250 | Motor Drive Module | Two 5 A DMOS H-Bridge DC motor drivers | Info |
FX-2260 | Stepper Motor Module | Two 1.5 A micro-stepping bipolar motor drivers,with full, half, quarter, eighth, and sixteenth step modes | Info |
FX-2310 | Switch State Input IEC61131-2 Module | Eight channel 24 VDC two-wire switch state detector; IEC61131-2 compliant | Info |
FX-2320 | Bidirectional Digital Isolator Module | Eight channel TTL logic-level isolator; input, output, or input/output configurable | Info |
FX-2330 | 4-20 mA Current Loop Receiver Module | Four channel 4-20 mA current loop receiver; 15-bit A/D converter | Info |
FX-2415 | A/D Converter Module | Eight channel 15-bit A/D converter | Info |
FX-2430 | DC 5 A Bidirectional Module | Four -5 A to +5 A (bidirectional) high-accuracy linear Hall DC current sensors | Info |
FX-2431 | DC 8 A Unidirectional Module | Four 8 A (unidirectional) high-accuracy linear Hall DC current sensors | Info |
Custom I/O Module Solutions
Can’t find an I/O solution in our off-the-shelf product line?
Contact us and will be happy to discuss your specific control and automation requirements. We’ll follow-up quickly, with a cost-effective proposal detailing a custom I/O module solution.
