Fault Protection: Over current, over temperature, load dump, and reverse battery polarity (continuous)
Load Current (8 channels on): 0.5 A/channel continuous (convective), 1 A/channel continuous (forced-air), unrestricted switch-on combinations
Operating Voltage: 11 V to 32 V
Load Dump: 90 V
Galvanic Isolation: 500 VDC
RDS (on): 150 mΩ typical
Initial Peak Short Circuit Current Limit: 3 A typical
Repetitive Short Circuit Limit: 2.2 A each channel
Thermal Overload Trip Temperature: 135˚C typical
Fan Enable: Any switch on
GPIO State Indicators: Eight bicolor (red = high, green = low) LEDs with adjustable pulse width modulation (PWM) illumination control
Control: GPIO 8-bit on/off
Field Connector: Phoenix Contact 10-circuit
Power: +5 VDC @ 14 mA
Maximum Installed Modules: 10
